VTech DS6511_-15-16-2-3-4A Abridged manual - Manual (Page 5)

5
Bluetooth
To use a Bluetooth enabled cell phone with your DS6511, you must first pair
and connect your Bluetooth cell phone(s) with the telephone base. All DS6511
handsets can be used to make or answer calls on the cell line.
Bluetooth wireless technology operates within a short range (a maximum of
approximately 30 feet). When you pair a Bluetooth cell phone to the telephone
base, place your Bluetooth cell phone closer to the telephone base to maintain
sufficient signal strength. For optimal performance, keep your cell phone within
5 feet of the telephone base while using the cell line.
Pair and connect your first Bluetooth cell phone
Press and hold 1/ 2 on the telephone base for about four seconds. The
1/ 2 light blinks.
Turn on the Bluetooth feature of your cell phone. Once your cell phone finds
your VTech phone ( VTech DS6511), press the appropriate key on your cell
phone to continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The
default PIN of the telephone base is 0000.
If the pairing fails, turn off the Bluetooth feature on your cell phone and on DS65
by pressing 1/ 2. Then repeat the steps above to pair and connect again.
In some cases, it may take you a few attempts to complete the pairing process.
Download directory
Press MENU when the phone is not in use.
Scroll to Bluetooth then press SELECT.
Scroll to Download dir then press SELECT.
Scroll to select the desired cell phone, then press SELECT.
For certain cell phones, you may need to press a key on your cell phone to
confirm the directory download.
The performance of directory download feature depends on the compatibility
of your Bluetooth cell phone. Refer to your cell phone’s user’s manual for more
information about how that device uses Bluetooth connectivity.
For Android cell phones, you may also download your cell phone
directory to your DS6511 via the VTech Contact Share application.
Go to www.vtechphones.com/apps/contact_share for
application download.
Using the handset menu
Press MENU when the phone is not in use.
Press or until the screen displays the desired feature menu.
Press
SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks(*).
Settings menu Description Options
LCD language Set the screen display language. English*
Français
Español
Clr voicemail Turn off the voicemail indicators (see the
note below).
Reset VM Icon?
Key tone Turn an audible beep on or off whenever a key
is pressed.
Key tone:On*
Key tone:Off
Home area code Enter your home area code if you dial only
seven digits for local calls.
Home area code
_ _ _
Dial mode Set the telephone to be touch-tone or
pulse dialing.
Touch-tone*
Pulse
Use the Clr voicemail feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away
from home. The Clr voicemail feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.
.
2.
•
•
.
2.
3.
4.
•
•
•
.
2.
3.
•
•
•