beautypg.com

VTech LS6191_-13-15-16-17 Quick start User Manual

Quick start guide

background image

Quick start guide

LS6191/LS6191-13/LS6191-15/

LS6191-16/LS6191-17

Introduction
This quick start guide provides you with the basic installation

and setup instructions. A limited set of features are described in

abbreviated form.
You may refer to the Abridged user’s manual provided in the

product package for installation and operation instructions, or

see the online Complete user’s manual at www.vtechphones.com

for complete installation and operation instructions.

Telephone base installation
Install the telephone base as shown below.

Use only the power adapter and battery supplied with

this product.
If you subscribe to telephone service from a cable company

or a VoIP service provider, contact your cable/VoIP service

provider for more information.

Telephone wall jack

Electrical outlet

(not controlled by

a wall switch)

Telephone base

power adapter

Telephone line cord

A DSL filter (not

included) is required

if you have DSL

high-speed Internet

service.
The DSL filter must

be plugged into the

telephone wall jack.

Download directory
You can download up to 200 directory entries to your

LS6191 via

Bluetooth wireless technology with the handset.

Place your cell phone next to the telephone base when you

download a cell phone directory to your

LS6191.

Make sure the cell phone is paired to your

LS6191, on the

device list and connected to the base before you download a

cell phone directory.
For certain cell phones, you may need to press a key on your

cell phone to confirm the directory download.
For Android and Blackberry cell phones, you may

also download your cell phone directory to your

LS6191 via the VTech Contact Share application.

Go to

www.vtechphones.com/apps/contact_

share for application download.

Press

MENU.

Scroll to

Bluetooth and then

press

SELECT.

Scroll to

Download dir

and then

press

SELECT.

The handset displays

Select a

device briefly. Scroll to choose

the desired device, then press

SELECT. The handset displays

D1 selected/D2 selected.

The handset flashes

Downloading... During the

download process, the handset

displays the progress.
When the downloading process

completes, the handset

displays

Entries added: XXX

briefly and then returns to the

Bluetooth menu.

1.
2.

3.

4.

5.

IMPORTANT!

Refer to the online Complete user’s manual for a full set of

installation and operation instructions. For manual download or

customer service, visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call

1 (800) 267-7377.

The

Bluetooth

®

word mark and logos are owned by Bluetooth SIG, Inc. and

any use of such marks by VTech Holdings Limited is under license.

VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks

and trade names are those of their respective owners.
Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD.

All rights reserved. Printed in China.

96-008829-040-100

Bluetooth

1
2

ECO

ANS ON

Download dir

1
2

ECO

ANS ON

Select a device

1
2

ECO

ANS ON

D1:Cell Phone A

1
2

ECO

ANS ON

D1 selected

1
2

ECO

ANS ON

Downloading...

18

1
2

ECO

ANS ON

Entries added:

118

1
2

ECO

ANS ON

Battery installation
Install the battery as shown below.

Slide the battery

compartment cover towards

the center of the handset until

it clicks into place.

3.

Place the handset in the

telephone base to charge.

4.

Insert the battery connector

securely into the socket.

1.

Place the battery with the

label

THIS SIDE UP

facing

up and the wires inside the

battery compartment.

2.

IMPORTANT:
Check for a dial tone by pressing

. If you hear a dial tone, the

installation is successful.
If you do not hear a dial tone:

Make sure the installation procedures described above are

properly done.
It may be a wiring problem. If you have changed your telephone

service to digital service from a cable company or a VoIP

service provider, the telephone line may need to be rewired to

allow all existing telephone jacks to work. Contact your

cable/VoIP service provider for more information.

Enter the handset menu

Press

MENU.

Press or until the screen displays the desired feature menu.
Press

SELECT to enter that menu.

To return to the previous menu, press

CANCEL.

To return to idle mode, press and hold

CANCEL.

Set date and time
If you subscribe to caller ID service, the day, month and time are

set automatically with each incoming call. You can also set the

date and time manually.

Press

MENU.

Scroll to

Set date/time, then press SELECT.

Use the dialing keys (

0-9) to enter the month, date and year,

then press

SELECT.

Use the dialing keys (

0-9) to enter the hour and minute.

Press or to choose

AM or PM, then press SELECT.

Set number of rings
You can choose two, three, four, five or six rings; or toll saver. With

toll saver selected, the answering system answers after two rings

if you have new messages, or after four rings when there are no

new messages. This enables you to check for new messages and

avoid paying long distance charges when calling from out of your

local area.

Press

MENU.

Scroll to

Answering sys, then press SELECT.

Scroll to

Ans sys setup, then press SELECT.

Scroll to

# of rings, then press SELECT.

Press or to choose

6, 5, 4, 3, 2 or Toll saver.

Press

SELECT.

1.
2.
3.

1.
2.
3.

4.
5.

1.
2.
3.
4.
5.
6.

Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

displays

when charging.

1
2

BASE

10:01AM 12/08

ANS

ON

9

Record your own announcement
You can use the preset announcement to answer calls, or

replace it with your own recorded announcement. It can be

up to 90 seconds in length.

Press

MENU.

Scroll to

Answering sys, then press SELECT twice.

The handset announces,

“To play, press

2. To record, press 7.”

Press

7 to record.

The handset announces,

“Record after the tone. Press

5 when

you are done.” After the tone, speak towards the handset

microphone. Press

5 when done.

Bluetooth setup
To use a Bluetooth enabled cell phone with your

LS6191, you

must first pair and connect your Bluetooth cell phone(s) with the

telephone base. All

LS6191 handsets can be used to make or

answer calls on the cell line.
Bluetooth wireless technology operates within a short range

(a maximum of approximately 30 feet). When you pair a Bluetooth

cell phone to the telephone base, make sure your Bluetooth cell

phone is close to the telephone base to maintain sufficient signal

strength. For optimal performance, keep your cell phone within

15 feet of the telephone base while using the cell line.

Pair and connect your first Bluetooth cell phone

Before you begin, make sure you have cellular

coverage and your Bluetooth enabled cell phone is not

connected to any other Bluetooth device.

Tap

on the telephone base. You

hear two beeps. The screen displays

Pairing D1... and the

1

icon flashes.

Turn on the Bluetooth feature of your

cell phone. Once your cell phone finds

your VTech phone (

VTech LS6191),

press the appropriate key on your cell

phone to continue the pairing process.

Your cell phone may prompt

you to enter the PIN of the

telephone base. The default PIN

of the telephone base is

0000.

When the cell phone is connected

to the telephone base, you hear

two beeps. The corresponding

status icon (

1

or

2

) displays.

If you have trouble pairing your cell phone, it may not

be compatible with your LS6191. Check the Bluetooth

compatibility list at www.vtechphones.com.

The pairing process may take up to one minute. If the pairing

process fails, try again.
The steps for the pairing process may vary for different cell

phones. If this happens, follow the prompts on your cell

phone and your

LS6191 to complete the pairing process.

1.
2.
3.

4.

1.

2.

3.

i

1
2

BASE

10:01

AM

12/08

ANS

ON

9

The pairing process may take up to one minute. If the pairing

process fails, try again.