VTech DS6751_-2-3 Quick start - Manual

DS6751/DS6751-2/DS6751-3
Go to www.vtechphones.com to register your product
for enhanced warranty support and latest VTech product news.
Quick start guide
1 Connect
Telephone base Charger
TEL. LINE
Use Only Supplied Adapter DC 6V
DSL filter
If you subscribe to telephone service from a cable company
or a VoIP service provider, contact your cable/VoIP service
provider for more information.
Plug!
Click!
Plug!
Plug!
Click!
2 Get started
Install battery
1 2 3
Click!
Battery Pack / Bloc-piles : (2.4V Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT Ba tt er y Pa ck / Bloc-piles
:
(2.4V Ni-MH) W ARNING / AV ERTISSEMENT
:
DO NO T BURN OR PUNC
TURE BA TT ERIES .
NE PA S INCINÉRER OU PERCER LES PILES. Made in China /
Fa briqué en chine
TH IS S ID E U P / C E CÔ TÉ V ER S LE H AU T
Plug!
Charge your phone
Charge for at least 30 minutes before initial settings.
Charge for 11 hours before initial use.
IMPORTANT:
Press
/HOME to check for a dial tone. If you hear a dial tone,
the installation is successful.
Configure your phone
Set date and time
Press MENU.
Scroll to Set date/time, then press SELECT.
Enter the month, date and year, then press SELECT.
Enter the hour and minute.
Scroll to
AM or PM, then press SELECT.
1.
2.
3.
4.
5.
Light on! The battery icon
Animates when the battery
is charging.
Flashes when the battery
is low and needs charging.
Becomes solid when the
battery is fully charged.
•
•
•
4
3 Bluetooth setup
Pair and connect your Bluetooth cell phone
To use a Bluetooth enabled cell phone with your DS6751, you
must first pair and connect your Bluetooth cell phone(s) with the
telephone base. All DS6751 handsets can be used to make or
answer calls on the cell line.
Make sure your phone has cellular coverage.
Make sure your Bluetooth enabled cell phone is free from any
Bluetooth connections.
Press 1 / 2 on the telephone.
You hear two beeps. The telephone
base screen displays Pairing D1... and
the 1 device light blinks.
Turn on the Bluetooth feature of your cell
phone. Once your cell phone finds your
VTech phone ( VTech DS6751), press
the appropriate key on your cell phone
to continue the pairing process.
Your cell phone may prompt you to enter the PIN of the
telephone base. The default PIN of the telephone base
is 0000.
When the cell phone is connected to
the telephone base, you hear two beeps.
The corresponding status icon ( 1 or
2
)
displays. The corresponding device light
( 1 or 2) turns on.
•
•
1.
2.
•
3.
If you have trouble pairing your cell phone, it may not
be compatible with your DS6751. Check the Bluetooth
compatibility list at www.vtechphones.com.
Bluetooth wireless technology operates within a maximum of
approximately 30 feet. When you pair a Bluetooth cell phone
to the telephone base, make sure your Bluetooth cell phone
is close to the telephone base to maintain sufficient signal
strength. For optimal performance, keep your cell phone within
15 feet of the telephone base while using the cell line.
The pairing process may take up to one minute. If the pairing
process fails, turn off the Bluetooth feature on your cell phone
and on the DS6751 by pressing 1 / 2. Then repeat the
steps above to pair and connect again.
In some cases, it may take you a few attempts to complete the
pairing process.
The steps for the pairing process may vary for different cell
phones. If this happens, follow the prompts on your cell phone
and your DS6751 to complete the pairing process.
•
•
•
4 Operate
Use the menu
Press MENU.
Press or until the screen displays the desired feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Call
Make a home call
Press /HOME or , and then dial the
telephone number.
Make a cell call:
Press /CELL. Scroll to select the desired
cell phone when necessary, then press
SELECT.
Enter the telephone number and then press
/CELL to dial.
Answer a home/cell call:
Press /HOME, /CELL, or any dialing keys.
End a home/cell call:
Press OFF on the handset or return the handset to the
telephone base or charger.
Press
/HOME on the telephone base if
it is a home line call.
Press
/CELL on the telephone base if it
is a cell line call.
1.
2.
3.
•
•
1.
2.
•
•
•
Adjust the ringer volume
Press MENU when the telephone base/handset is not in use.
Scroll to Ringers, then press SELECT.
Scroll to Home volume or Cell volume, then press SELECT.
Scroll to adjust the volume, then press SELECT.
Adjust the listening volume
During a call press /VOLUME or
/VOLUME on the handset.
During a call press /VOL or /VOL on
the telephone base.
Use the directory
Add a directory entry
Press MENU when the phone is not in use.
Scroll to Directory, then press SELECT.
Scroll to Add contact, then press SELECT.
Enter the number (up to 30 digits).
-OR-
Copy a number from the redial list by pressing
REDIAL and
then press , , or REDIAL repeatedly to select a number.
Press SELECT.
Press SELECT to move to the name.
Enter the name (up to 15 characters). Additional key presses
show other characters of that particular key.
Press
SELECT to save.
Review the directory
Press when the phone is not in use.
Scroll to browse through the directory, or use
the dialing keys to start a name search.
1.
2.
3.
4.
•
•
1.
2.
3.
4.
5.
6.
7.
1.
2.
Use the answering system
Turn the answering system on or off
Press /ANS ON/OFF on the telephone base.
Message playback
Press /PLAY when the telephone base
is not in use.
Press
MENU twice on the handset when
it is not in use.
Record your own announcement
You can use the preset announcement to answer calls, or
replace it with your own recorded announcement. It can be
up to 90 seconds in length.
Press MENU.
Scroll to Answering sys, then press SELECT twice.
The system announces, “To play, press 2. To record, press 7.”
Press 7 to record.
The system announces, “Record after the tone. Press 5 when
you are done.” After the tone, speak towards the microphone.
Press 5 when done.
Set number of rings
You can choose two, three, four, five or six rings; or toll saver.
With toll saver selected, the answering system answers after
two rings if you have new messages, or after four rings when
there are no new messages. This enables you to check for new
messages and avoid paying long distance charges when calling
from out of your local area.
Press MENU.
Scroll to Answering sys, then press SELECT.
Scroll to Ans sys setup, then press SELECT.
Scroll to # of rings, then press SELECT.
Scroll to 6, 5, 4, 3, 2 or Toll saver.
Press SELECT.
•
•
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
Information
The Bluetooth ® word mark and logos are owned by Bluetooth SIG, Inc. and
any use of such marks by VTech Holdings Limited is under license.
VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks
and trade names are those of their respective owners.
Copyright © 2013 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. Printed in China.
96-009589-020-100
Refer to the Abridged user’s manual that came with your new
phone for installation and operation instructions.
You may also refer to the online
Complete user’s manual for
a full set of installation and operation instructions. For manual
download or customer service, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada,
go to www.vtechcanada.com or call 1 (800) 267-7377.
Abridged user’s manual
Abridged user’s manual
Complete user’s manual
Complete user’s manual
BASE
12:52 AM 08/08
MSG # 1
1
2
1
2