VTech CS6859_-2-3-4 Manual - Manual (Page 32)

28
Telephone operation
Transfer a call
While on an outside call, you can transfer the call from one handset to another
system device.
During a call, press MENU.
Press /CID CID or / to scroll to Transfer, then press SELECT.
If you have one handset, your handset displays
Calling base and then Transferred.
If you have two or more handsets, your handset displays
Transfer to: Press 7 for the telephone base or 1-5 for
HANDSET 1 to HANDSET 5. Your handset displays Calling
base or Calling HS X and then Transferred.
The destination device rings and its screen displays
Incoming call.
3. To answer on the destination device, press , , or any dialing
key (0-9, TONE or QUIET
#
) on the destination handset, or
press /SPEAKER or any dialing key (0-9, TONE or QUIET
#
)
on the telephone base.
If the destination device does not answer the call within 30 seconds,
the call will be reverted to the originating handset. If you do not
press , , or any dialing key (0-9,
TONE
or
QUIET
#
) on your
handset to reconnect the outside call within 30 seconds, the call
ends automatically.
If the destination device is in the directory or caller ID log, or is
out of range, the originating handset displays Unable to call and
then reconnects to the outside call.
1.
2.
•
•
•
•
ECO
ECO
ECO
Transfer
Calling HS X
Transferred
Incoming call
ECO
Transfer to:
ECO