beautypg.com

VTech CS6529-4B Quick start User Manual

Quick start guide

background image

Set number of rings
You can set the answering system to answer an incoming

call after two, three, four, five or six rings; or toll saver. With

toll saver selected, the answering system answers after

two rings when you have new messages, or after four rings

when you have no new messages.

Press

MENU.

Scroll to

Answering sys, then press SELECT.

Scroll to

Ans sys setup, then press SELECT.

Scroll to

# of rings, then press SELECT.

Press or to choose

6, 5, 4, 3, 2 or Toll saver,

then press

SELECT.

Record your own announcement
You can use the preset announcement to answer calls,

or replace it with your own recorded announcement. The

announcement can be up to 90 seconds in length.

Press

MENU.

Scroll to

Answering sys, then press SELECT twice.

Press

7 to record.

Speak towards the microphone after the handset

announces, “

Record after the tone. Press

5 when you are

done.”
Press

5 when finished.

IMPORTANT!

Refer to the online Complete user’s manual for a full set of

installation and operation instructions. For manual download or

customer service, visit our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com

or call 1 (800) 267-7377.

Copyright © 2013 for VTECH TELECOMMUNICATIONS LTD.

All rights reserved. Printed in China.

96-008563-090-100

1.
2.
3.
4.
5.

1.
2.
3.
4.

5.

Introduction
This quick start guide provides you with basic installation and

setup instructions. A limited set of features are described in

abbreviated form.
You may refer to the Abridged user’s manual provided in the

product package for installation and operation instructions,

or see the online Complete user’s manual at

www.vtechphones.com for complete installation and

operation instructions.

Telephone base and charger installation
Install the telephone base and charger as shown below.

Telephone line

cord

Telephone base

Telephone wall jack

Electrical outlet

(not controlled

by a wall switch)

Telephone base

power adapter

Electrical outlet

(not controlled

by a wall switch)

Charger adapter

Charger

A DSL filter

(not included) is

required if you have

DSL high-speed

Internet service.
The DSL filter must

be plugged into the

telephone wall jack.

Use only the power adapters and batteries supplied with

this product.
If you subscribe to telephone service from a cable

company or a VoIP service provider, contact your cable/

VoIP service provider for more information.

Plug the battery connector

securely into the socket.

1.

Place the battery with the

label

THIS SIDE UP facing

up and the wires inside the

battery compartment.

2.

Slide the battery

compartment cover towards

the center of the handset

until it clicks into place.

3.

Place the handset in the

telephone base or charger

to charge.

4.

Set date and time

Press

MENU.

Scroll to

Set date/time, then press SELECT.

Use the dialing keys (

0-9) to enter the month, date and

year and then press

SELECT.

Use the dialing keys (

0-9) to enter the hour and minute.

Press or to select

AM or PM.

Press

SELECT.

1.
2.
3.

4.

5.

Battery installation and charging
Install the battery as shown below. Once you have installed the

battery, you may be able to make and receive short calls. For

best performance, charge the handset battery continuously for at

least 11 hours.

IMPORTANT:
Check for a dial tone by pressing . If you hear a dial tone, the

installation is successful.
If you do not hear a dial tone:

Make sure the installation procedures described above are

properly done.
It may be a wiring problem. If you have changed your

telephone service to digital service from a cable company or

a VoIP service provider, the telephone line may need to be

rewired to allow all existing telephone jacks to work. Contact

your cable/VoIP service provider for more information.

Enter the handset menu

Press

MENU.

Press

or until the screen displays the desired feature menu.

Press

SELECT.

To return to the previous menu, press

CANCEL.

To return to idle mode, press and hold

CANCEL.

1.
2.
3.


Quick start guide

CS6529/CS6529-14/CS6529-15/CS6529-16/

CS6529-17/CS6529-19/CS6529-2/CS6529-25/

CS6529-26/CS6529-3/CS6529-4B