Velleman projects K8093 User manual - Manual (Page 11)

- 10 - - 11 -
R.
..
R.
..
R.
..
R. ..
R. ..
R.
..
R.
..
IV. ARMINg ThE UNIT
Out of the box no remotes are assigned for safety reasons. When the unit powers up it is always armed!
Unit is capable of storing 4 remotes, FIFO.
The stored remotes can be cleared from memory by holding the LEARN button while powering up, The unit will beep 10 times
(fast) to indicate the erasing process.
STATUS INDICATION (LD3)
LEARNING A REMOTE:
1. Press the “Learn”-button once, the status LED light continious. The unit is ready for learning a remote (there is a timeout!).
2. Hold the 2 buttons of the remote pressed. Release the buttons when the status LED turns off , the remote is learned.
REMOTE CONTROL:
1. DISARM
2. ARM
Not Armed
OFF
Learn mode
ON
Armed
BLINK
1
1
2
2
III. CONNECTION DIAgRAM
Arming the unit
���������������� ���������������������