Renata SA Changing the Battery - Manual

Changing the Battery
When installing a new battery, please ensure that no metal tweezers or similar
metallic tools are used. Plastic tweezers are required to be used; otherwise, the
battery could be short-circuited and damaged.
Also, make sure that the battery contacts are not bent, which could cause the battery
to short-circuit. Make sure the battery is not in the same container as the housing
base and/or the screws provided, otherwise the battery can be short-circuited and
damaged.

Only use the recommended Renata battery type as stated in the instruction
sheet.

Make sure that the contact surfaces of the battery are clean.

Make sure that the battery polarity (+ / -) is correct when replacing the battery.

Remove a dead battery immediately from the watch. Keeping a dead battery in
a watch can damage the movement.
Renata SA Tel. +41 (0)61 975 75 75 [email protected]
CH-4452 Itingen/Switzerland Fax. +41 (0)61 975 75 95 www.renata.com