Ohaus DEFENDER 7000 Rectangular Scales Data Sheet - Manual (Page 4)

Specifications
Model D71P15HR1 D71P30HR1 D71P60HR1 D71P60HL2 D71P100HL2 D71P150HX2 D71P300HX2
Capacity (max) x
Default Readability (d)
30lb x 0.005lb
480oz x 0.1oz
30lb : 0.1oz
15kg x 0.002kg
15000g x 2g
60lb x 0.01lb
960oz x 0.2oz
60lb x 0.2oz
30kg x 0.005kg
30000g x 5g
150lb x 0.02lb
2400oz x 0.5oz
150lb : 0.5oz
60kg x 0.01kg
60000g x 10g
250lb x 0.05lb
4000oz x 1oz
250lb : 1oz
100kg x 0.02kg
100000g x 20g
300lb x 0.05lb
4800oz x 1oz
300lb : 1oz
150kg x 0.02kg
150000g x 20g
600lb x 0.1lb
9600oz x 2oz
600 lb : 2 oz
300kg x 0.05kg
300000g x 50g
Maximum Displayed Resolution 1:7500 1:6000 1:7500 1:5000 1:7500 1:6000
Capacity x
Certified/Approved Readability
30 lb x 0.01 lb
15 kg x 0.005 kg
60 lb x 0.02 lb
30 kg x 0.01 kg
150 lb x 0.05 lb
60 kg x 0.02 kg
250 lb x 0.1 lb
100 kg x 0.05 kg
300 lb x 0.1 lb
150 kg x 0.05 kg
600 lb x 0.2 lb
300 kg x 0.1 kg
Maximum Certified Resolution 1:3,000 1:3,000 1:3,000 1:2,500 1:3,000 1:3,000
Indicator Model T71P
Column 13.8 in / 350 mm painted steel 26.8 in / 680 mm painted steel
Construction ABS plastic indicator, stainless steel removable weighing platform, painted steel column and base construction, aluminum loadcell
Safe Overload Capacity 150% of maximum capacity
Protection Dry use for scale, IP67 for loadcell
Weighing Units lb, oz, lb:oz, kg, g, custom unit
Modes/Features Static Weighing (single or dual range), Dynamic Weighing, Counting, Checkweighing, Percent Weighing, Display Hold, Accumulation, Library
Display 6-digit, 7-segment LCD, 25mm/1 inch high primary digits, dual line, with high-contrast white LED backlight
Keypad Positive feedback membrane keys, 5 function keys and alpha-numeric keypad
Stabilization Time Within 2 seconds
Auto-zero Tracking Off, 0.5, 1 or 3 d
Zeroing Range 2% or 100% of capacity
Calibration Span: 1kg or 1lb to 100% of capacity / Linearity: 3 or 5 point
Power 100-240 VAC / 50-60Hz internal universal power supply, 6 ‘C’ cell batteries (not supplied) with 80 hour life
Interface RS232 and external input
Operating Temperature Range 14°F to 104°F / -10°C to 40°C
Scale Dimensions
(W x H1 x H2 x D1 x D2)
12 x 3.7 x 23.6 x 14 x 18.7 in
305 x 95 x 600 x 355 x 475 mm
15.7 x 4.1 x 37 x 19.7 x 24.4 in
400 x 105 x 940 x 500 x 620 mm
16.5 x 4.9 x 37 x 21.7 x 26.4 in
420 x 125 x 940 x 550 x 670 mm
Shipping Dimensions (L x W x H)
19.3 x 16.1 x 17.3 in
490 x 410 x 440 mm
29.1 x 27.2 x 9.1 in
740 x 690 x 230 mm
29.5 x 30 x 9.1 in
750 x 710 x 230 mm
Approx. Net Weight 25.3 lb / 11.5 kg 49.1 lb / 22.3 kg 61.1 lb / 27.7 kg
Approx. Shipping Weight 30.2 lb / 13.7 kg 56.4 lb / 25.6 kg 67.7 lb / 30.7 kg
Defender
TM
7000
Rectangular Scales
80774472_C
©
Copyright
Ohaus
Corporation
OHAUS CORPORATION
* 7 Campus Drive
Suite 310
Parsippany, NJ 07054 USA
Tel: 800.672.7722
973.377.9000
Fax: 973.944.7177
www.ohaus.com
With offices throughout Europe,
Asia, and Latin America
* ISO 9001
Registered Quality Management System
Features
T71P: ABS plastic housing with internal rib reinforcements, reversible rear cover, backlit LCD weight display,
checkweighing indication (green, yellow, red), membrane keypad with raised tactile keys, built-in bi-directional
RS232 with manual/continuous/interval printing, external tare input, hardware configuration lockout switch,
internal switching power supply with line cord and battery power using 6 “C” cell batteries.
Other Features
Zero point calibration, calibration test, span or linear calibration, selectable auto-zero tracking range, selectable
stability range, selectable averaging level, selectable LCD backlight, selectable auto shutoff, retain zero weight data
after power-off, Geo geographical adjustment, selectable key beep, key function lock, menu lock, selectable power-
on and calibration unit, battery status display, display of gross/net weight, indication of stability, center of zero,
over- and underweight, overload and underload conditions. Configuration menus for PRINT1, PRINT2, COM1,
COM2, and I/O.
Compliance
• Legal for Trade (Made from Certified/Approved weighing components): NTEP (CC No. 09-102 for indicator;
99-203A3 for bases) / Measurement Canada (Approval No. AM-5762 for Indicator; AM-5675 for bases)
• Safety and EMC:
c
UL
us
2005/95/EC low voltage directive: EN60950-1:2001, FCC Part 15 Class A 2004/108/EC
EMC directive: EN61326-1:1997; +A1:1998; +A2:2001; + A3>2003
• Other: Compliant to Directive 2002/96/EC on waste electrical and electronic equipment (WEEE)
• Quality: OHAUS quality management system registered to ISO 9001:2008