Ohaus RS232 Interface Manual ru User Manual
Page 5
RS232 Interface
EN-3
Output examples: (Note: * and _ indicate spaces)
*****192.21_g
- Manual, Continuous or On-Stable printing
*******0.01_g_?
unstable reading
*******0.01_g___ 00:00:00
- Interval Printing (example:15sec interval)
*****176.30_g_?_00:00:15
unstable reading
*****192.08_g___00:00:30
*****192.21_g
*****207.80_g_TOTAL
- Accumulate Mode (Manual printing only)
RS232 INPUT
The balance will respond to various commands sent via the interface adapter. Terminate the
following commands when with a [CR] or [CRLF].
Scout Pro and Traveler Commands
?
print current mode
0A
turn Auto-print off
SA
Auto-print on, prints on stability
CA Continuous
Auto-print
(n)A Auto-print on 1 to 3600 second intervals (n = 1 to 3600)
C
perform span calibration
L
perform linearity calibration
0M gram
mode
1M ounce
mode
2M
troy ounce mode
3M pennyweight
mode
4M
parts counting mode
5M pound
mode
T
tare balance, same as pressing ON-ZERO
V
print software version
(Esc)R reset balance to factory defaults
P same
as
pressing
LE
print last error code, i.e. [Err 0]
0S print
unstable
data
1S
print stable data only
Navigator Commands
P same
as
pressing
SP
print stable weight only
IP
immediate print of displayed weight (stable or unstable)
CP
Continuous print of weights
SLP
Auto-print stable non-zero weight only
SLZP Auto-print stable non-zero weight and zero reading
xP
Auto-print on 1 to 3600 second intervals (x = 1 to 3600)
0P
turns auto-print off
PM
print current mode