Listening to usb playback, Specifications – Naxa NPB-259 User Manual
Page 5

8
To select a song which track number exceeds 10(for MP3 disc only)
To select a song/track which number exceeds 10, press the FOLD.+/+10 or FOLD.-/-10 key on the remote
control each time to skip forward or backward 10 tracks, then press the NEXT/TUN.+ or BACK/TUN.-
button on unit or the TUN./SKIP SEARCH FORWARD/BACWARD on remote to select desired track.
For example: to select the 17
th
track from the 1
st
track, press FOLD.+/+10 key on remote, and then press
the NEXT/TUN.+ button on unit or the TUN./SKIP SEARCH FORWARD key on remote six times
immediately.
To select a desired folder(for MP3 disc that contains more than one folder)
To select a desired folder during playback, press and hold the FOLD.+/+10 or FOLD.-/-10 key on
remote control to next/previous folder.
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99 tracks
can be stored in the memory in any order.
1. In stop mode, press the PROG. Key on remote, the“
P ”will flash and the P01 indicator will be
on.
2. Press the NEXT/TUN.+ button on unit or the TUN./SKIP SEARCH FORWARD on remote to select
the first desired track to be programmed.
3. Press the PROG. Key on remote to enter. The display changes to show
P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the PLAY/PAUSE button to start playback from the first programmed track.
6. Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP button twice to erase the memory, or
2. Open the CD compartment lid, program will be erased.
REPEAT
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press the P-MODE key on remote control once in play, " " shows flashing on the display.
The current track will be played over and over again till you press the STOP button.
2. To cancel repeat play, press P-MODE key on remote till the " " disappears from display.
To repeat all the Tracks
1. Press P-MODE key on remote control till the " " shows steady on the display, all tracks on the
disc will be played over and over again till you press the STOP button.
2. To cancel repeat play, press the P-MODE key on remote till the " " disappears from the display.
To repeat current Directory (for MP3 only)
1. Press P-MODE key on remote control till “ FOLDER” shows steady on the display, the current
directory will be played repeatedly until the STOP button is pressed.
2. To cancel repeat play, press the P-MODE key on remote till the " FOLDER" disappears from
the display.
RANDOM PLAY
Press the P-MODE key on remote in play mode till the “RAND” shows steady on the display, the
random play will start from next track automatically or press CD skip forward button, until all tracks are
played over and then stop. Press the P-MODE key on remote once to cancel.
9
LISTENING TO USB PLAYBACK
1. Press the STANDBY/FUNCTION button on unit or the FUNCTION key on remote to USB mode.
2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks stored in the
USB. The playback stars from track 1 automatically after reading the USB.
3. Press the STOP button on unit or on remote
on remote to stop playing. The display will show total
number of USB and STOP.
4. Proceed repeat play (repeat 1- repeat folder - repeat all)/program play/skip up and back operation as
the same described in above “CD/MP3 OPERATION”.
CAUTION:
Do not use any USB extension cable for connecting the USB bar which may cause harmful
interference
SPECIFICATIONS
GENERAL
Power
Requirement
AC
110/220V
~
60/50Hz
DC 12V UM-1 x 8 PCS
Remote Handset
DC 3V 2 x UM-4 size batteries
Power consumption
35 Watts
Dimensions
460mm (L) x 200mm (H) x 342mm (W)
Operation temperature
+5° C - + 35 °C
RECEIVER SECTION
Receiving
Bands
AM
/
FM
ST.
Tuning Range
AM 520 - 1710 KHz
FM 87.5 - 108 MHz
COMPACT DISC SECTION
Optical
Pickup
3-Beam
Laser
Frequency
Response
100Hz
–
16
KHz
CASSETTE SECTION
Recording
System
2
Tracks
2
channel
(Stereo)
Biasing
System DC
bias
Frequency
Response
125
–
6.3
KHz
Wow
and
Flutter
0.35
%
WRMS
(JIS)
AUDIO SECTION
Power
output
Max.
5
Watts
x
2
Woofer
Power
output
Max.
10
Watts
ACCESSORIES
Instruction
Booklet
1
Remote Sensor 1
AC Cord 1
Caution
To avoid electric shock, this unit must not be exposed to dripping water splash.
Ventilation warning - The normal ventilation of the product shall not be impeded for intended use.