Vitek VT-1251 - Manual (Page 7)

7
ENGLISH
set after some time depending on the po-
sition of the temperature regulator (13).
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend
cleaning the steam chamber, especially in
the regions with “hard” water.
• Fill the water tank (12) till the MAX mark
(14).
• Put the iron on the base (11).
• Insert the power plug into the outlet.
• Set the temperature regulator (13) to the
MAX temperature: “max” the (7) indicator
will light up (Pic.3).
• When the sole temperature (17) reaches
the desired temperature value, the (7) indi-
cator will go out, you can start cleaning of
the iron chamber.
• Unplug the iron, set the temperature regu-
lator (13) to the «MIN» position.
• Pull the plug out of the socket.
• Hold the iron above the sink horizontally,
and hold the SELF CLEAN button (15)
(pic.7).
• Boiling water together with scale will be
throwing out from the openings in the iron
sole (17).
• Slightly sway the iron back and forth, until
water goes out of the water tank (12).
• Place the iron on the base (11) and let it
cool down completely.
• When the sole (17) cools down completely,
wipe it with a dry cloth.
• Before you take the iron for storing, make
sure that there is no water in the water tank
(12) and that the iron sole (17) is complete-
ly dry.
CARE AND CLEANING
• Before cleaning the iron, make sure that it
is turned off and has cooled completely.
• Wipe the iron's outer surface with a damp
cloth and then wipe dry.
• Sediment on the iron sole can be removed
with a cloth soaked in vinegar-water solu-
tion.
• After removing sediment, polish the sole
with a dry cloth.
• Do not use abrasive substances to clean
the sole and body of the iron.
• Avoid touching the iron sole with sharp
metal objects.
STORAGE
• Turn the temperature regulator (13) anti-
clockwise till MIN position, set the steam
release regulator (3) to the left position -
steam release OFF position.
• Remove the power plug from the outlet.
• Open the water tank lid (2), turn over the
iron and drain any remaining water from
the water tank (12) (pic. 8).
• Close the lid (2).
• Set the iron vertically and allow it to cool
completely.
• Store the iron vertically.
Delivery set
1. Iron – 1 pc.
2. Water bowl – 1pc.
TECHNICAL CHARACTERISTICS
Power requirements: 240 V ~ 50 Hz
Power consumption: 2000 W
Specifications subject to change without
prior notice.
MINIMUM SERVICE LIFE - 3 YEARS
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC
and to the Law Voltage Regulation
(73/23 EEC)
1251.indd 7 1251.indd 7 02.06.2008 12:01:29 02.06.2008 12:01:29