Low rise crib p2, Low rise crib – Land of Nod LOW-RISE CRIB User Manual
Page 2

Low Rise Crib
Assembly Instructions
2
1
Made in USA - r05
The Land of Nod
8135 River Drive
• Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Page 2 of 6
!
Mount one
side panel to the rear posts of the headboard panels. Use 4 decora-
tive bolts and 4 lock washers to LOOSELY fasten the side panel to the headboard
posts. DO NOT tighten the bolts until instructed in step 3.
Install the
mattress support in the crib with the flat side up. Extend the mounting
flange on each corner and attach the spring to headboard and footboard at the
desired level using 4
hex bolts and hex wrench provided. The top position is
recommended for newborns. The bottom position must be used when the baby
is able to kneel or stand in the crib.