Cube, Cleaning and care – Land of Nod Cube Collection 3 Cube Bench User Manual
Page 3

CUBE
3-CUBE BENCH
Made in Thailand - r07
Page 3 of 4
Customer Service
800.933.9904 | Latest instructions available at www.landofnod.com
left
side panel
6
Fit dowels of
left and right side panels into
corresponding holes of assembled unit as shown.
Secure each side with 4
bolts, 4 spring washers
and 4
flat washers using an allen wrench. Do not
over tighten the bolts.
Cleaning and Care
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished
with a protective clear lacquer.
7
With the assistance of another adult, position assembled
unit upright as shown. Attach
back panel to assembled unit
with 18
small screws using a screwdriver.
Assembly is now complete.
right
side panel
back panel
NOTE: Do not over
tighten the bolts
NOTE: Make sure
slots of back panel
are positioned on
top during assembly