Attention – Concord TRANSFORMER XT INSTRUCTION MANUAL User Manual
Page 8
_ INSTALLING THE CONCORD TRANSFORMER WITH TWINFIX
34
35
In cars with standard headrests, these may be adjusted or removed to make it easier
to install the child car seat. Please note that the car headrests must be replaced and
re-positioned correctly when an adult is travelling in the car.
ATTENTION!
• TWINFIX is an additional fitting system for securing the CONCORD
TRANSFORMER and is not suitable for securing a child.
• Children must always be secured by means of the car’s three-point safety belt.
With the TWINFIX button (
09
) still
pulled out, guide the CONCORD
TRANSFORMER back until it lies as
close/flush as possible to the car
seat backrest. Release the TWINFIX
button (
09
) when the seat is in the
required position.
Pull the TWINFIX button (
09
) forwards
until the TWINFIX adapters (
10
) on
the back of the child seat are fully
extended.
Position the CONCORD TRANSFORMER facing forwards on
the vehicle seat or bench fitted with ISOFIX points.
Push the child car seat back and onto the ISOFIX points until
the locking mechanisms on both TWINFIX adapters (
10
) have
clicked audibly into place and the safety indicators on both
adapters are green!