Cerwin-Vega CXA-10 Manual - Manual (Page 8)

Cerwin-Vega! CXA-8 & CXA-10 AMPLIFIER SPECIFICATIONS
CXA-8 CXA-10
400 W 600 W
600 W 900 W
900 W 1400 W
Output Power (RMS)
8 ohms
4 ohms
2 ohms
102 dB 104 dB Signal to Noise Ratio (20 Hz - 20k Hz)
0.01% 0.04% Distortion (SMPTE-IM)
4 dBu 4 dBu Input Sensitivity @ 8 ohms
33 dB 35 dB Voltage Gain
Class AB Class H Output Circuitry
8.8 / 4.4 amps 6.8 / 3.4 amps @ 1/8 power @ 4 ohms
12 / 6 amps 17 / 8.3 amps @ 1/3 power @ 4 ohms
19.5 / 9.5 amps 32 / 16 amps @ Full power @ 4 ohms
0.01% 0.03% 20 Hz - 20k Hz @ 1/2 Power
0.10% 0.10% 1k Hz @ Full Power
280 350 Damping Factor (400 Hz)
18 Kg 18.8 Kg Net Weight
FREQUENCY RESPONSE
Distortion
Current Consumption
1200 W 1800 W 8 ohms
1800 W 2800 W 4 ohms
Stereo Both Channels Driven
Output Power (RMS) Bridged Mono
+/- 0.5 dB 20 Hz - 20 kHz
Input Impedance 15k ohm Un-balanced / 30k ohm balanced
Input Clipping 22 dBu (10 Vrms)
Cooling
CONNECTORS
CONTROLS
Continuously variable speed fan, front to rear
Input Unbalanced RCA input and link out
Output 5-way binding post
Front AC power switch / Channel 1 & 2 volume
Rear HPF Switch / Limiter Switch / Mode Selector Switch
Indicators Power On: Light Blue / Signal: Dark Blue / Limit-Clip: Red
Power Requirements 120V 60Hz (USA) / 230V 50Hz (EU)
Dimensions 482 X 101 X 420 mm
Protection
Short Circuit / Thermal / Current Limit resetable breaker / DC offset /
Current In-Rush / RF Protection / On-Off Mute
+/- 3 dB 5 Hz - 60 kHz
120V / 230V
6
CXA Manual Rev 3_Manual_CXA_English_DB 1/31/2012 10:06 AM Page 6