Cerwin-Vega CVP-1152 Manual multi User Manual
Page 7
7
Cerwin-Vega! CVP-2153 & CVP-1152 Loudspeaker Systems
3. Ensure the connector is seated properly.
4. Reconnect the woofer and tighten all eight screws.
5. Reinstall the grill with all twelve screws.
To change the system back to Full Range mode see steps 1-5 above, but move the wire harness from “BI AMP”
to “FULL RANGE” on the input circuit board and the crossover circuit board. Please check (Figure 2, Bi Amp
Mode), displayed on the next page.
Figure 1, Full Range Mode