A P Products SRS (Single-Row-Socket) Jumper - Manual

A P Products
SRS (Single-Row-Socket) Jumper Selection Guide
Style No.: 39035
Great Jumper
• Eliminates usual cable/connector assembling.
• Inseparable - nothing to come apart.
• Ultimate strain relief inherent in design.
• No pull tabs required; cable molded into connector.
• Eliminates usually exposed conductor ends.
• Single-row contacts on .100 in. (2,54 mm) centers.
• Line-by-line probe access holes are standard.
• Mate with single rows of .025 in (0,64 mm) square or round posts spaced on
standard .100 in. (2,54 mm) centers.
• May be daisy chained onto .050 in (1,27 mm) and .100 in. (2,54 mmm) pitch cable
as well as combined with other IDC connector styles on .050 pitch cables.
• Insertable polarity keys are available.
• 100% factory testing of each jumper shipped.
FEATURES and BENEFITS:
SPECIFICATIONS:
Electrical:
Current rating:
Dielectrical withstanding voltage:
1 amp (D.C.)
1000 volts (sea level)
Physical:
Environmental:
Material:
Operating temperature range:
U.L. rated 94 V-O
-40°C to +105°C
04
05
07
08
09
10
11
12
14
16
18
20
24
32 0.494 (12,55)
0.594 (15,09)
0.794 (20,17)
0.894 (22,71)
0.994 (25,25)
1.094 (27,79)
1.194 (30,33)
1.294 (32,87)
1.494 (37,95)
1.694 (43,03)
1.894 (48,11)
2.094 (53,19)
2.494 (63,35)
3.294 (83,67)
W Size
DIMENSIONS:
in inch (mm)
Contact material:
Plating: CuNi18Zn20
see Surface-Finish-Materials Table