Evolution Technologies MK-261 - Manual

MK-261
Evolution MK-261
www.evolution.co.uk
MIDI KEYBOARD MANUAL
1. POWER
SUPPLY
1-1
Soundcard as power source
Using the supplied self powered connector cable, connect the 5 pin male plug to the MK-261 MIDI keyboard and the
15 pin male plug to the MIDI port on your PC soundcard.
IMPORTANT – DO NOT USE THIS CABLE TO POWER ANY OTHER EQUIPMENT
1-2 AC
Power
You can also use an AC adapter (not included) with the following specification: 9-12V DC output, 250-300mA,
centre positive.
Note: Do not leave the adapter plugged in for long periods of time if the unit is not in use.