Declaration of conformity – Bosch AHS 45-16 User Manual
Page 12
12 | English
F 016 L70 775 | (25.4.12)
Bosch Power Tools
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 97 dB(A). Con-
formity assessment procedure according to Annex V.
Equipment category: 25
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
23.03.2012
Mounting and Operation
Troubleshooting
After-sales Service and Customer
Assistance
www.bosch-garden.com
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: [email protected]
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Delivery Scope
1
Connecting the Extension Lead
2
Starting
2
Stopping
2
Working Advice
2, 3
Blade Maintenance
4
Storage and Transport
4
Selecting Accessories
5
Problem
Possible Cause
Corrective Action
Hedgecutter does not op-
erate
Power turned off
Turn power on
Mains socket faulty
Use another socket
Extension cable damaged
Inspect cable, replace if damaged
Fuse faulty/blown
Replace fuse
Hedgecutter operates in-
termittently
Extension cable damaged
Inspect cable, replace if damaged
Internal wiring of garden product damaged
Contact Service Agent
On/Off switch defective
Contact Service Agent
Motor runs but blades re-
main stationary
Internal fault
Contact Service Agent
Cutting blade hot
Cutting blade blunt
Have blade sharpened
Cutting blade has dents
Have blade inspected/overhauled
Too much friction, due to lack of lubricant
Apply lubricant spray
Excessive vibrations/noise Garden product defective
Contact Service Agent
OBJ_BUCH-1297-004.book Page 12 Wednesday, April 25, 2012 11:10 AM