Bosch BLE 200 Professional - Manual (Page 19)

English | 19
Bosch Power Tools 1 609 929 L81 | (20.7.07)
Assembly
Inserting/Replacing the Battery
Use only alkali-manganese batteries.
Press the latch 9 of the battery lid outward with a suitable tool and
open the battery lid 10.
When inserting batteries, pay attention to the correct polarity ac-
cording to the representation on the inside of the battery compart-
ment.
When the direction indicators 4 and 2 flash alternately, the batter-
ies must be replaced.
Always replace all batteries at the same time. Only use batteries
from one brand and with the identical capacity.
f
Remove the batteries from the measuring tool when not using
it for extended periods. When storing for extended periods,
the batteries can corrode and discharge themselves.
Operation
Initial Operation
f Do not subject the measuring tool to extreme temperatures or
variations in temperature. As an example, do not leave it in ve-
hicles for longer periods. In case of large variations in tempera-
ture, allow the measuring tool to adjust to the ambient temper-
ature before putting it into operation.
Position the measuring tool at least 50 cm away from the laser level
and in such a manner that the laser beam can reach the reception
area 6. Set the highest rotational speed on the laser level.
OBJ_BUCH-71-002.book Page 19 Friday, July 20, 2007 10:07 AM