Bosch GML 10,8 V-LI Professional - Manual (Page 15)

English | 15
Bosch Power Tools 1 609 92A 00B | (18.12.12)
A battery that is new or has not been used for a longer period
does not develop its full capacity until after approx. 5 charg-
ing/discharging cycles.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Troubleshooting – Causes and Corrective
Measures
When the corrective measures do not eliminate an error,
please contact an authorised service agent for Bosch power
tools.
Maintenance and Service
Maintenance and Cleaning
For safe and proper working, always keep the construction
site radio clean.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
If the construction site radio should fail despite the care taken
in manufacture and testing, repair should be carried out by an
authorised customer services agent for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the construction site radio.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Cause Corrective Measure
Construction site radio inoperative
No power supply Completely insert the power-
supply plug and plug-in con-
nector or the charged battery
pack
Construction site radio too
warm or too cold Wait until the construction
site radio has reached oper-
ating temperature
Construction site radio inoperative on A/C power supply
Power-supply plug or connec-
tion cable defective Check the power-supply plug
and the connection cable,
and have them replaced as
required
Wrong power-supply plug in-
serted Use the original Bosch power-
supply plug (also available as
spare part)
Construction site radio inoperative on DC power supply
Battery contacts contami-
nated Clean the battery contacts
(e.g. by inserting and remov-
ing the battery several times)
or replace the battery
Battery pack defective Replace the battery
Battery pack too warm or too
cold Wait until of the battery has
reached operating tempera-
ture
Construction site radio suddenly inoperative
Power-supply plug or battery
pack not properly or com-
pletely inserted Plug in power-supply plug or
battery properly and com-
pletely
Bad radio reception
Interference from other
devices or insufficient set-up
location Position the construction site
radio at another location with
better reception or with
greater clearance to other
electronic devices
Time indication faulty
Back-up batteries of clock
empty Replace back-up batteries
Back-up batteries incorrectly
inserted (wrong polarity) Insert back-up batteries cor-
rectly
OBJ_BUCH-1619-002.book Page 15 Tuesday, December 18, 2012 9:27 AM