Symbols, Intended use, Technical data – Bosch GHP 5-14 User Manual
Page 11

English | 11
Bosch Power Tools
F 016 L72 355 | (16.8.12)
f
The unit may only be used by authorised persons who have
received training or have demonstrated their ability to op-
erate the unit. The unit must not be operated by children or
juveniles (danger of accidents due to incorrect use of the
unit). Children should be supervised to ensure that they do
not play with the appliance.
f
The unit is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the unit by a person responsible for their safety.
f
The unit must never be left unsupervised while the unit is
switched on.
f
The water jet from the high-pressure nozzle produces a re-
coil on the gun. You should therefore hold the gun and
spray lance firmly with both hands.
Transport
f
Switch off the motor and secure the unit before transport-
ing.
Maintenance
f
Switch off the unit prior to all cleaning and maintenance
work and before replacing components. Pull out the mains
plug if the unit is mains-operated.
f
Repairs may only be carried out by authorised Bosch Serv-
ice Centres.
Accessories and spare parts
f
Only use accessories and spare parts which have been ap-
proved by Bosch. Original accessories and spare parts
guarantee that the unit can be operated safely and without
any breakdowns.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Intended Use
The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories such as cleaning agents approved by Bosch are
used.
Intended use is related to operation within 0°C and 40°C am-
bient temperature.
Technical Data
Symbol
Meaning
Movement direction
Weight
On
Off
Lo
Low pressure
Hi
High pressure
Accessories
Pressure washer
GHP 5-14
GHP 6-14
Article number
3 600 J10 1..
3 600 J10 2..
Rated power
kW
2.4
2.6
Supply Temperature max.
°C
50
50
Supply rate min.
l/min
8.3
10.5
Rated pressure
MPa
14
14
Max. operating pressure
MPa
15
15
Flow rate
l/min
8.3
10.5
Maximum input pressure
MPa
1
1
Repulsive force at the gun to the maximum pressure
N
22.98
32.24
Motor Insulation
Class F
Class F
Motor Protection
IPX5
IPX5
Detergent tank
–
z
Autostop function
z
z
Net impedance
Щ
Щ
Weight according to EPTA-Procedure 01/2003
kg
23.4
25.6
Protection class
/I
/I
Serial number
See serial number (rating plate) on pressure washer.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0,153 ohm.
OBJ_BUCH-1762-001.book Page 11 Thursday, August 16, 2012 10:03 AM