Bosch Rotak 32 - Manual (Page 10)

10 | English
F 016 L70 769 | (16.11.12) Bosch Power Tools
Troubleshooting
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
STOP
Problem Possible Cause Corrective Action
Motor refuses to start Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Possible clogging Check underneath the garden product and
clear out as necessary (always wear gardening
gloves)
Motor protector has activated Allow motor to cool and increase height of cut
Mowing too low for the conditions Increase height of cut
Machine functions
intermittently Extension cable damaged Inspect cable, replace if damaged
Internal wiring of garden product damaged Contact Service Agent
Motor protector has activated Allow motor to cool and increase height of cut
Garden product leaves ragged
finish
and/or
Motor labours Height of cut too low Increase height of cut
Cutting blade blunt Replace the blade
Possible clogging Check underneath the garden product and
clear out as necessary (always wear gardening
gloves)
Blade fitted upside down Refit blade correctly
Blade not rotating while garden
product switched on Cutting blade obstructed Switch off garden product
Clear obstruction (always wear gardening
gloves)
Blade nut/bolt loose Tighten blade nut/bolt
(17 Nm)
Excessive vibrations/noise Blade nut/bolt loose Tighten blade nut/bolt
(17 Nm)
Cutting blade damaged Replace the blade
OBJ_BUCH-1266-003.book Page 10 Friday, November 16, 2012 8:26 AM