Bosch ROTAK 34 - Manual (Page 14)

English - 2
■ Remove the plug from the socket:
– whenever you leave the machine
– before clearing a blockage
– before checking, cleaning or working on the lawn-
mower
– after striking a foreign object. Inspect the lawn-
mower for damage and make repairs as neces-
sary
– if the lawnmower starts to vibrate abnormally
(check immediately).
■ Keep all nuts, bolts and screws tight to be sure
that the lawnmower is in safe working condition.
■ Check the grass catcher frequently for wear or
deterioration.
■ Replace worn or damaged parts for safety.
■ Ensure replacement parts fitted are Bosch ap-
proved.
■ Always wear gardening gloves when handling or
working near the sharp blade.
This product is intended for domestic lawn mowing.
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately between 11.0 and 13.5 kg. If necessary, ob-
tain assistance to remove from packaging.
Take care when carrying the mower to the lawn, as
the blades are sharp.
Carefully remove the machine from its packaging
and check that you have all the following items:
– Lawnmower with handle assembly
– 1 Handle bottom
– 2 Bolts
– 2 Wing nuts
– 2 Screws
– 2 Grassbox parts (ROTAK 34/37)
– 3 Grassbox parts (ROTAK 40/43)
– 2 Cable clips
– Cable restraint (if supplied separately)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
1 Switch lever
2 Safety button
3 Handle top
4 Cable restraint**
5 Mains plug**
6 Grassbox
7 Deflector guard
8 Handle bottom
9 Ventilation slots
10 Wheels
11 Grass comb
12 Height of cut lever
13 Serial Number
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
Technical data
Lawnmower ROTAK 34 ROTAK 37 ROTAK 40 ROTAK 43
Part number (typ) 3 600 H81 A.. 3 600 H81 B.. 3 600 H81 C.. 3 600 H81 D..
Rated power [W] 1300 1400 1600 1700
Blade width [cm] 34 37 40 43
Height of cut [mm] 20 – 70 20 – 70 20 – 70 20 – 70
Grassbox capacity [l] 40 40 50 50
Weight (max.) [kg] 11.0 11.2 13.2 13.5
Protection class / II / II / II / II
Serial Number See serial No 13 (rating plate) on machine.
Note: Please observe the order number of your machine. The trade names of individual machines can vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.36 Ohm, disturbances are unlikely to occur.
Intended Use
Introduction
Delivered Items
Operating Controls
F 016 L70 636 - Buch Seite 2 Freitag, 27. November 2009 9:44 09
14 • F 016 L70 636 • 09.11