Garmin Nuvi 770 - Manual (Page 7)

Pairing Your Phone
1. Confirm that your phone is supported by
the nüvi. (See www.garmin.com/bluetooth .)
2. From the Menu page, touch Tools >
Settings > Bluetooth .
3. Touch the Add button.
4. Enable your phone’s Bluetooth component
and enable Find Me/Discoverable/Visible
mode. These settings might be in a
Bluetooth, Connections, or Hands-free
menu.
5. Touch OK on the nüvi.
6. Select your phone, and touch OK .
7. Enter the nüvi’s Bluetooth PIN ( 1234 ) in
your phone.
Calling a Number
1. Touch Phone > Dial .
2. Enter the number, and touch Dial .
3. To end the call, touch > End Call .
Receiving a Call
When you receive a call, a message appears on
the nüvi. Touch Answer .
Using Call Waiting
If you get a call waiting call, the nüvi displays
a message. Touch Answer . The first call is put
on hold.
1. During the call, touch > Switch To .
2. Touch End Call to hang up; this does not
disconnect the call on hold.
Using the FM Transmitter
Before using the FM transmitter in your area, see
the FM transmitter legal notice in the owner’s
manual.
You can listen to your nüvi audio on your
vehicle’s FM stereo speakers. From the Menu
page, touch Volume > FM Trans > enable
FM Transmitter . If you are using an FM
traffic receiver, touch Auto Tune , and tune
your stereo to the same channel. If you are not
using an FM traffic receiver or you are using
an MSN Direct receiver, select an FM channel
with a lot of static, and select the same channel
on the nüvi.