Step 2: configuring the c550, Step 3: acquiring satellites, Step 4: using the c550 – Garmin StreetPilot c550 User Manual
Page 11
c550 Owner’s Manual
G
ettinG
S
tarted
Step 2: Configuring the c550
To turn on your c550, press and hold the power button on the side of the unit.
Follow the on-screen instructions to configure your c550.
Step 3: Acquiring Satellites
Go outdoors to an open area, away from tall buildings and trees. Turn on the c550.
Acquiring satellite signals may take a few minutes.
The
bars in the upper-left corner indicate satellite strength. When the bars are
green, your c550 has acquired satellite signals; you can find a destination and go to it.
Step 4: Using the c550
A
Touch to find a destination.
B
Touch to view the map.
C
Touch to make a call (when connected
to a
with
Bluetooth
®
wireless technology).
D
Touch to view traffic incidents, when an
FM traffic receiver is connected.
E
Touch to listen to MP3 files loaded on
the SD card or c550 drive.
F
Touch to adjust the c550’s settings.
G
Touch to adjust the brightness of the
screen.
A
B
C
D
E
F
G