Using the portable friction mount, Product compatibility, Registering the device – Garmin GLO User Manual
Page 4: Specifications
4
Using the Portable Friction
Mount
The portable friction mount comes in
some GLO packages and is available as
an optional accessory�
1
Wipe the mounting surface and the
back of the mount with a wet cloth to
remove dust and debris�
2
Insert the sensor in the mount so the
LEDs face up and the mini-USB port is
accessible�
3
Place on a flat surface�
Periodically, you should wipe the surface
and the mount with a wet cloth to remove
dust and debris to help prevent the mount
from sliding�
Product Compatibility
Made for iPod
®
touch (4th generation),
iPod touch (3rd generation), iPhone
®
4S,
iPhone 4, iPhone 3GS, iPad
®
2, and iPad�
"Made for iPod, iPhone, iPad” means
that an electronic accessory has been
designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has
been certified by the developer to meet
Apple performance standards� Apple is
not responsible for the operation of this
device or its compliance with safety and
regulatory standards� Please note that the
use of this accessory with iPod, iPhone, or
iPad may affect wireless performance�
The GLO sensor is also compatible with
many Android
®
, Windows
®
or Blackberry
®
smartphones, tablets and notebook
computers�
When using the GLO GPS/GLONASS
sensor with an Android device, you
may need to use an application to allow
the sensor to properly communicate
with the Android system over Bluetooth
technology� The application will allow the
Android system to accept non-system (or
mock) GPS/GLONASS signals�
registering the Device
• Go to
• Keep the original sales receipt, or a
photocopy, in a safe place�
Specifications
Case: Rugged, but not water-resistant
Power Supply: Rechargeable lithium-ion
battery, 12 hours (typical use)