Acura 2009 TSX - Manual (Page 230)

To switch the PS name display
function on and off, press and
release the TITLE button. With the
system on, you will see the ‘‘PS ON’’
message on the center display. If the
station you are listening to is an RDS
station, the displayed frequency
switches to the station name.
On the FM band, you can select a
favorite station and display the
program service name according to
the information provided by the
radio data system (RDS).
The program service name display
function shows the name of the
station you are listening to. With the
audio system on and the FM band
selected, you can turn this function
on or off.
You will see ‘‘0’’ displayed if auto
select cannot find a strong station for
every preset button.
You can also press the A.SEL side of
the SCAN/A.SEL bar. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds. The system stores the
frequencies of six AM and twelve
FM stations in the preset buttons.
press ENTER
on the interface selector.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
For information on FM/AM radio
frequencies and reception, see page
.
, press the
A. SEL side of the bar. This restores
the presets you originally set.
285 CONTINUED
To turn off auto select,
To turn off auto select
Radio Data System (RDS)
Program Service (PS) Name Display
Playing the FM/AM Radio (Models with navigation system)
Fe
a
tu
re
s
227
PS ON MESSAGE
2009 TSX
Table Of Contents Main Menu