Multi-information display – Acura 2008 TSX User Manual

Page 90

To change the settings, stop the
vehicle, and make sure to set the
parking brake and put the
transmission in Park (A/T) or
neutral (M/T). If you try to enter the
customizing mode while the vehicle
is moving, the above message
appears and you cannot change the
settings.

The first customizing menu is:

DEFAULT ALL

CHANGE SETTING

Every time you press the INFO
button, the display cycles from
‘‘CHANGE SETTING,’’ ‘‘DEFAULT
ALL,’’ ‘‘EXIT’’ and then back to
‘‘CHANGE SETTING.’’ Press the
SEL/RESET button to enter your
selection.

If you want the settings as they were
when the vehicle left the factory,
select ‘‘DEFAULT ALL,’’ as
described on page

If you want to change any vehicle
control settings, select ‘‘CHANGE
SETTING,’’ and follow the
instructions on page

You can also use the select/reset
knob in the instrument panel. Turn
the knob to select a setting and press
it to enter your selection.

If you do not make any changes,
select ‘‘EXIT,’’ the display returns to
normal display.

CONTINUED

Multi-Information Display

Inst

nt
s

Cont

AT model

MT model

2008 TSX

Table Of Contents

Main Menu