Information features, 2010 rdx – Acura 2010 RDX Navigation User Manual
Page 86
86
Navigation System
Information Features
Delete
From the
Calendar
screen, select the
date of the schedule you wish to
remove. To remove the schedule, say or
select DELETE.
Done
Once you have finished entering the
schedule, say or select DONE. The
Calendar
screen is redisplayed and the
entered schedule is shown.
NOTE:
• You can only enter one message per
day.
• A maximum of 50 entries can be
stored in the schedule. After you
reach 50 entries, a warning message
will appear telling you that the limit
has been reached. You can clear any
older entries as needed.
• To reactivate a previous message,
turn the Reminder setting from
OFF
to
ON. If it is not turned on, the
reminder will not be displayed when
you start the vehicle.
• The system displays active calendar
entries only after you answer
OK on
the
Disclaimer
screen.
• For more information, see
System
Start-up on page
Calculator
When you say or select Calculator, the
display changes to:
Use the Interface Dial and its Knob to
use the following features:
Calculator
The calculator function operates like a
standard handheld calculator.
Unit Conversion
Values entered on the calculator can be
converted from one unit to another (e.g.,
inches to millimeters).
Unit Conversion
To perform a conversion:
1. Enter a numeric value to be converted
(for example, 100).
2. Move the Interface Dial down to
select UNIT CONVERSION. The
screen changes to:
3. Rotate the Interface Dial knob to
select the type of unit you want to
convert (for example, weight) and
push in on the dial to select. The
screen for that conversion type
appears (see illustration in step
2010 RDX