Scarlett IS-509 User Manual
Page 7
5
GB
INSTRUCTION MANUAL
• Connect the plug to the power supply. The appliance
will start operating, the indicator light will turn on.
3.3 KEEP WARM FUNCTION
• When the water is boiled the thermo pot will
automatically switch to keep warm function.
• Press the temperature control button several times to
sequentially set the temperature to 100°С, 90°С, 60°С.
ATTENTION: Do not use the appliance without
water or with a water volume less than 0.5 l. It
may lead to malfunction.
3.4 REBOIL FUNCTION
• Keep warm function temperature is lower than boil
temperature. The thermo pot allows to boil warm water
quickly. For that press the “REBOIL” button.
3.5 2 WAYS OF WATER DISPENSE
• To unlock automatic water flood button press the
“UNLOCK” button on control panel.
– Press the automatic water dispense button on
control panel.
– Press the water dispense key.
3.6 REFILL
• To prevent the thermo pot from operating dry refill water
regularly, so its level in the appliance should not be
lower than mark “MIN”.
3.7 SWITCHING OFF
• To switch the appliance off, disconnect it from the power
supply.
4 CARE AND CLEANING
• Remove the plug from the mains socket and let the
appliance cool down completely.
• Open the lid and pour out the water through the orifice.
• Clean the outside of the thermo pot with a soft damp
cloth, then wipe with a dry cloth. Do not use any
abrasive materials.
• Remove scale regularly with special descaling agents
available at the market, following instructions on
cleaner’s package.
5 STORAGE
• Switch off and unplug the appliance; let it entirely cool
down.
• Complete all requirements of Chapter CLEANING AND
CARE.
• Keep the appliance in a dry cool place.