AcuRite 00939 Scale - Manual (Page 6)

6
4. With the first item(s) still in place, add the next item to the surface of the
scale. The display will now show the weight of that item.
5. Press ZERO to see the combined weight of the two items.
6. Press ZERO again to reset the display to 0.
7. Repeat these steps until all items have been added.
Note: Adhere to the maximum weight capacity of the scale.
Minus Function
If you add multiple items to the scale at one time to get a total weight, you can
identify the value of a single item or ingredient by using the Minus Function:
1. Add item(s) to the scale; display shows total weight.
2. Press ZERO to reset display to 0.
3. Remove an item.
4. Display shows the weight of the removed item with the Minus Function
indicator (negative value is shown on the display).
5. Press ZERO to view the cumulative weight of any remaining items.
6. Repeat steps as needed.
Warning Messages
Replace battery (see page 4).
Maximum capacity has been exceeded. Remove
items to prevent damage.
Power the Unit ON/OFF
The scale will automatically power off when the display shows 0 or the
same weight for 2 minutes. Press ZERO to power the scale on. To power off
manually, press ZERO when the LCD is showing 0, or press and hold ZERO for
3 seconds if a weight is shown on the display.
Storage
The scale can stored on a level surface or can be hung by using the integrated
hang hole.