AcuRite 75329T Clock - Manual

Atomic Digital Clock
with indoor/outdoor temperature,
forecasting and calendar
USER GUIDE
Package Contents:
(1) Atomic Digital Clock
(1) Wireless Outdoor
Temperature Sensor
(1) User Guide
What You’ll Need:
(8) AA Batteries
Thank you for purchasing this quality TIMEX ® brand product. Please read these instructions COMPLETELY to fully understand
the features and functions of this clock, and to enjoy its benefits. Make sure to keep this guide handy for future reference.
An Atomic clock is a timepiece that maintains accuracy up to one second per million years
using the most precise method of time synchronization, radio signals. In North America, the
National Institute of Standards and Technologies (NIST) operates an Atomic clock in Fort
Collins, Colorado, that transmits the time codes via the radio station WWVB.
This quality TIMEX ® clock includes a built-in receiver that picks up the Atomic radio signal
from WWVB. To maintain the best possible reception, place the unit so that the backside
faces in the general direction of Colorado. What's more, the IntelliTime
® technology built
into this clock makes for hassle-free automatic setting and resetting for daylight saving time.
PLEASE NOTE: Due to solar radiation in the atmosphere, the atomic clock signal is weaker
during the day. Most synchronization will happen at night when there is less interference.
WHAT IS AN ATOMIC CLOCK?
To receive product information, register your product online. It's quick & easy!
Log on to http://www.chaneyinstrument.com/ProductReg.aspx
MODEL # 75329T
NOTE: A clear protective film is applied to the LCD at the
factory that must be removed prior to using this product.
Locate the clear tab and simply peel to remove.
1
Please DO NOT return product to the retail store. For technical assistance
and product return information, please call customer care @ 877-221-1252
Monday - Friday -- 8:00 a.m. - 4:30 p.m. CST
w w w . c h a n e y i n s t r u m e n t . c o m
Timex® is a registered trademark of Timex Corporation in the U.S. and other countries.
Manufactured and serviced by
Chaney Instrument Co.
Lake Geneva, WI 53147
www.chaneyinstrument.com
© 2010 Chaney Instrument Co.
INST - 75329T 070110
8
This device complies with part 15 of the FCC rules and RSS-210 of IC rules subject
to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may
cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, There is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
Patent numbers: 5.978.738: 6.076.044: 6.597.990