Activeforever A & D Wireless Precision Scale (Each) - Manual (Page 4)

- -
Display Symbols
Replacing the Batteries
Symbols Operation Description
This.symbol.appears.when.the..
measurement.display.is.stable.
The.measurement.is..
complete,.you.may.step.off.
The.battery.capacity.is.very.low..
The.progress.bar.displays.when.the.scale.
is.finding.a.stable.measurement..Up.to.five.
dashes.will.appear.before.a.stable..
measurement.is.reached.
Continue.standing.still.on..
the.scale.until.a.stable..
measurement.is.displayed.
Insert.new.batteries..
Caution
■
Insert.the.battery.with.the.positive.(+).and.negative.(-).terminals.properly.aligned.with.the.
corresponding.symbols.in.the.battery.compartment..
■
Replace.all.four.batteries.with.new.ones,.when. .symbol.appears.
■
Do.not.mix.used.and.new.batteries..It.may.result.in.damage.to.the.scale.or.shortened.
battery.life.
■
When.the.batteries.are.depleted,.nothing.is.displayed.even.if.the.scale.is.tapped.to.activate.
■
Remove.the.batteries.from.the.battery.compartment.when.the.scale.is.not.to.be.used.for.a.long.time..
They.may.leak.and.damage.the.scale.
Steps for Replacing Batteries
1.....Remove.the.battery.compartment.cover.on.
the.underside.of.the.scale.by.gently.pushing.
the.hook.in.the.direction.indicated.by.the..
arrow.and.lifting.the.cover.backward.
2.....Install.four.new.batteries.with.the.positive.(+).
and.negative.(-).terminals.properly.aligned.
with.the.corresponding.symbols.in.the.battery.
compartment.
3.....Replace.the.cover.by.sliding.it.into.the..
compartment.and.gently.pressing.into.place.