Activeforever Ameriphone P-300 Amplified Photo Phone - Manual (Page 11)

9
Installation
3. Using the short modular
cord, mount the phone as
shown in figure 6.
4. Set the dial mode switch to
T (tone) if you have touch
tone service. Set the switch
to P (pulse) if you have pulse
rotary) dialing.
5. Connect the handset cord to
the telephone as shown in
figure 3.
6. Lift the handset and listen
for a dial tone.
7. Your Photo Phone is
ready for use.
E
N
G
L
I
S
H
Figure 5- Phone base installation
for wall mounting
MANU AL
AUTO
MANU AL
AUTO
Figure 6- Wall mounting
installation