ACS ACR31 Swipe Card Reader - Manual (Page 9)

ACR31 – Reference Manual [email protected]
Version 1.00
www.acs.com.hk
Page 9 of 19
6.2. SPH_to_RDR_Sleep
This command is used to force the ACR31 to enter sleep mode immediately upon receiving this
command.
Offset Field Size Value Description Encrypted
0 bStartByte 1 23h Message start byte.
No
1 wLength 2 0003h
Number of extra bytes starting
from the next field for this
message.
3 bMessageType 1 63h
4 wCheckSum 2
CRC16 checksum for all the
preceding fields.
The response to this message is RDR_to_SPH_ACK.