Before installation, Unpacking, Installation for standalone kvm – Acnodes MKP1602__MKCS 3204 User Manual
Page 4
14628 Central Ave,
Chino, CA 91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at .
MKCS1602/1603/1604/3202/3203/3204
1U rackmount Matrix Cat6 KVM Switch
Before Installation
¦
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
¦
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Installation for standalone KVM
Screw A: 2 pcs
Screw B: 8 pcs
M3.2 x 4.5 mm
M4 x 10 mm
¦
Install each bracket using screws
A
B
provided shown in
Figure 1.
¦
Fix the KVM into the rack
Figure 1.