Acnodes KD 5154 - Manual (Page 21)

17
Setup and Operating Guide
H.POSITION: Adjusts the horizontal image position
within the display area of the LCD.
V.POSITION: Adjusts the vertical image position within
the display area of the LCD.
AUTO PHASE: Performs automatic adjustment of the
ADC sample pixel clock.
DELAY: Manual adjustment of the sample pixel clock
phase.
3. CONTRAST MENU
AUTO-BALANCE: Performs automatic adjustment of
color brightness in relation to the background.
CONTRAST: Manual adjustment of individual RGB
channel contrast.
4. LANGUAGE MENU
Selects English or Spanish language OSD.
5. RESET
Reloads all parameters to factory settings.
6. SAVE
Saves current parameters.
O
When switching display modes the screen position may become
offset by a few pixels to the top/bottom or left/right in the
display area. This can be corrected by pressing “MENU” >
“GEOMETRY MENU” > “AUTO PHASE” > and then press “MENU”
> “SAVE”. Next time you switch to this mode the correct screen
position will be recalled.