1u rackmount c ombo kvm switch – Acnodes KV 802 User Manual
Page 2
14628 Central Ave,
Chino, CA 91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product descr
are subject to change without no
please visit Acnodes’ web site at
KV802/1
1U Rackmount C
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee i
contents. The information in this document is subject to change without notice. We are not liabl
results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manu
¦ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
¦ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditi
temperatures not exceeding 40º Celsius (104º Fahrenheit).
¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentall
age to other equipment or injury to persons nearb y.
¦ When the equipment is in an open position, do not cover, block or in any way obstruct the ga
power supply. Proper air convection is necessary to keep it from overheating.
¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for th
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
on the equipment’s ratings label.
¦ Observe all precautions and warnings attached to the equipment.
¦ If you don’t intend on using the equipment for a long time, disconnect it from the power outle
aged by transient over-voltage.
¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid s
supply or on other hardware may cause damage, fire or electrical shock.
¦ Only qualified service personnel should open the chassis. Opening it yourself cou ld damage
date its warranty.
¦ If any part of the equipment becomes damaged or stops functioning, have it checked by qual
What the w arranty does not cover
¦ Any product, on which the serial number has been defaced, modified or removed.
¦ Damage, deterioration or malfunction resulting from:
? Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized pro
failure to follow instructions supplied with the product.
? Repair or attempted repair by anyone not authorized by us.
? Any damage of the product due to shipment.
? Removal or installation of the product.
? Causes external to the product, such as electric power fluctuation or failure.
? Use of supplies or parts not meeting our specifications.
? Normal wear and tear.
? Any other causes which does not relate to a product defect.
¦ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Com mission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device
rules. These limits are designed to provide reasonable protection against harmful interference i
Any changes or modifications made to this equipment may void the user’s authority to operate t
generates, uses, and can radiate radio frequency energy and, if not installed and used in accor
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
harmful interference to radio or television reception, which can be determined by turning the e
is encouraged to try to correct the interference by one or more of the following measures:
¦ Re-position or relocate the receiving antenna.
¦ Increase the separation between the equipment and receive r.
¦ Connect the equipment into an outlet on a circuit different from that to which the receiver is c