Sony SLV-SE100K - Manual (Page 11)

Getting
Star
te
d
11
Tuning your TV to the VCR
Step 4 : Tuning your TV to the VCR
If your TV has a Scart (EURO-AV) connector, see page 13.
If your TV does not have a Scart (EURO-AV) connector
Follow the steps below so that your TV will properly receive the video signals from
your VCR.
1 Press
?/1 ON/STANDBY to turn on the VCR.
2 Press RF CHANNEL on the VCR lightly.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3 Turn on your TV and select a programme position for the VCR picture.
This programme position will now be referred to as the video channel.
4 Press RF CHANNEL.
The TV system appears in the display window.
PROGRAM +/–
RF CHANNEL ?
/
1
ON/STANDBY
ONSTAN
AUTO ST UP
R CANNL
AUTO ST UP
R CANNL
continued