Pairing the f300 with bluetooth devices – Acme F300 User Manual

Page 5

1. Adjust the frequency of car FM radio to a frequency that is

not broadcasting radio station;

2. Rotate the MFB of the F300 to adjust its frequency to be

same as the frequency of car FM radio.

Pairing the F300 with Bluetooth Devices

Pairing with Bluetooth Mobile Phone

Please make sure your mobile phone has bluetooth function

that is available. Specific pairing steps may vary with different

mobile phones. Please refer to your mobile phone user manual

for further information. The steps are as follows:

A. Keep the F300 and your Bluetooth mobile phone within

1 meter when pairing.

B. Make the F300 enter into pairing mode (Press and hold

button for 4-5 seconds until LED flashes red and

blue alternately).Switch on Bluetooth function of mobile

phone and search the Bluetooth device. After searched,

select “F300” in the Bluetooth device list.

C. According to indication, enter password or PIN No:”0000”,

and press either the “Yes” or “confirm” key.

D. After successful pairing, select “F300” in the Bluetooth

device list, and press “connect”. After successful

connecting, the red indicator light of the

button

will be on. If your Bluetooth mobile phone supports

A2DP, the blue indicator light of the

button will be

also on.

Pairing with Stereo Bluetooth Transmitter

The pairing ways of Bluetooth transmitter depends on

Bluetooth transmitter itself, please refer to user manual of your

Bluetooth transmitter for further information. The steps are as

follows:

A. Keep the F300 and Bluetooth transmitter within 1 meter

when pairing.

B. Put the F300 into pairing mode (red and blue indicator

lights flashes alternately).

C. Switch on your Bluetooth transmitter and make it enter

into pairing mode.

D. The Bluetooth transmitter will search and connect with

the F300 automatically. After successful connecting, the

blue indicator light of the

button will be on.

Notes:

• The pairing mode will last 3 minutes. The F300 will exit

pairing mode automatically if it cannot be connected with

any devices after 3 minutes. If you want to continue to pair

the F300 with Bluetooth device, firstly please switch off the

F300, and then pair again according to the aforementioned

steps.