Acme CA11 - Manual (Page 5)

5
GB
Drivers Installation
1. Connect the Web Cam USB plug to the USB port of computer.
2. Connect the Ø3.5 mm signal output cable to the audio frequency
input jack of the PC.
3. Your computer will search the Web Cam automatically.
4. Insert the Web Cam installation CD into the CD-ROM of your
computer.
5. Wait a few seconds and software will guide you through the software
setup process automatically. Then follow on-screen instructions.
6. Operating system will ask you to restart your computer. Please follow
the instruction to restart your computer.
7. After restarting, go to “Start” menu and find “USB PC Camera” in the
program list.
8. When the “USB PC Camera” begin to work, please click “Options” and
select “Preview”. Now, you can begin to use Web Cam.
Notices:
• Don’t use fingers or any other sharp or coarse items to touch the
camera. Soft cotton cloth is highly recommended to clean the optics
parts.
• Don’t use this product when ambience is too hot or cold or dusty.
• Please avoid this product dropping heavily. Heavily dropping will
cause it not to work well.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may
not be treated as household waste. By ensuring this product is
disposed of correctly, you will help protect the environment. For
more detailed information about the recycling of this product,
please contact your local authority, your household waste disposal
service provider or the shop where you purchased the product.