Acme SS207 User Manual

Page 9

Use audio signal cord (optional) with two pair RCA ends, one pair

RCA end for DVD/VCD output “L” and “R” socket, another pair

RCA end for input socket on the back panel of subwoofer, make sure white end connects to

white socket and red end to red socket.

3. Connecting power source and use

• Make sure that Volume and BASS knobs are set to the minimum level (rotate knobs counter

clockwise as far as they will go).

• Make sure that all the cables are connected correctly.

• Plug AC power cable into wall outlet and switch power switch to ON position. LED indicator

in the front of the subwoofer will start to shine blue.

• Rotate VOL and BASS knobs to set desired sound volume and bass level.

• Set VOL and BASS knobs to the minimum before unplugging power cable from outlet or if

speakers are not in use.

USB / Memory card reader

USB / Memory card instruction

1. Insert USB or memory card to the port.

2. Press “INPUT” button to select audio source from audio cable or USB / memory card as input. The

last inserted device will be played.

3. Wait for system reading from the input source device(s).

4. System will play the music in the relevant devices after you select USB or memory card as input

source.

5. Press “NEXT” or “PREVIOUS” for playing next or previous song.