Acme HD-110 - Manual (Page 9)

9
GB
using the appliance
Drying
1. Make sure the power switch is in the 0 position.
2. Put the plug into wall socket.
3. Select the desired airflow setting to switch on the appliance.
• Set the power switch to airflow setting I for styling your hair or drying short hair.
• Set the power switch to airflow setting II for ultra-quick drying.
4. Dry your hair by making brushing movements with the hairdryer at a small distance from your
hair.
5. Set the switch position to 0 after drying and unplug. Allow the hair dryer to cool for 10 to 15
minutes before storing it.
Cool shot
With this switch it is possible to interrupt the heating process so that the air can be mixed
according to individual requirements.
ION function (for HD-110I)
This ion function provides additional shine and reduces frizz and static electricity. It is particularly
suitable for dry and almost-dry hair. Ion function is working when dryer is on and power switch is
to I or II setting.
Concentrator
With dryer concentrator, you can direct the airflow straight at the brush or comb with which you