Acme F200-01 - Manual (Page 4)

EN
Operation illustration:
1. The FM Transmitter has 206 diff erent frequencies (87.5 – 108.0
MHz) to use. Use CH- and CH+ keys to change frequency.
2. Use number keys (0-9) to select the music track number. After
selecting number of track it starts play automatically.
3. Every time EQ is pressed the sound characteristics are changed:
NORMAL ROCK POP CLASSIC JAZZ COUNTRY.
Press EQ key for about 4 seconds and the system returns back to
NORMAL.
4. Last settings for volume, FM-transmission-frequency and music
track are stored when the device is powered off .
5. USB and SD-card can both be connected to the device. The fi rst
medium connected, either USB or SD-card, is played. To select the
other medium, the fi rst one must be disconnected.
6. When an external audio device is connected to the Line-In jack,
the playback from USB or SD-card stops automatically and cannot
be started or paused by pressing the PLAY/PAUSE button.
Replacing the Remote Control Battery
1) Remove the battery compartment cover by pulling the cover in
the direction of the arrow.
2) Remove the battery.
3) Insert the replacement battery. Keep attention on the direction of
the correct polarization (+/-).
4) Put the cover back to the battery compartment.