Acme WW01 - Manual (Page 5)

5
GB
Moon phase
Moon phase is displayed according to the current calendar.
Clock & calendar
Press [CLOCK] to toggle display between time, calendar and day of the week.
Hold [CLOCK] button to enter clock setting mode. Using [UP] or [DOWN] to adjust and [CLOCK] to
confirm, the following values can be set in sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > EXIT
Home time, world (zone) time
Hold [ZONE] to enter world (zone) time setting mode. Press [UP] or [DOWN] to enter the desired hour
offset value from –12 to +12 hours. Press [CLOCK] to confirm and exit.
Press [ZONE] button to toggle between home (radio-controlled) time and world (zone) time. “ZONE”
icon appears when world (zone) time is selected. When zone time is not used, set zone time to “0”.
Alarm setting
Press [ALARM] to show alarm time and “AL.” icon will appear. Press again to enable or disable the
alarm. Bell icon “ ” appears when alarm is enabled.
Hold [ALARM] to enter alarm time setting mode. Press [UP] or [DOWN] to enter the desired Hr/ Min
values and press [ALARM] to confirm setting.
Snooze & backlight
When alarm is going off, press [SNOOZE/CHANNEL/LIGHT] to trigger snooze alarm and “Zz” icon will
appear. To stop alarm for one day, press [ALARM] key.