Acme BE-100 - Manual (Page 7)

7
GB
Electromagnetic compatibility (EMC): the Acme appliance complies with all standards regarding
electromagnetic fields.
using the appliance
BEFORE USING THE FIRST TIME
1. Before connecting to the power, please check whether the type of supply and the mains
voltage match with the details given on the rating label on the appliance.
2. Rip off all wrapping paper and plastic bags.
3. Clean the fittings (refer to Cleaning).
4. Knowing your food processor.
HOW TO USE
The food processor is used for mince or mix the food. Please, use it as following:
• Set the dip on the motor unit, screw tightly and lock it.
• Connect to power. To avoid spattering, put the dip of the food processor into ingredients
before switching on the power.
• Hold the mixing cup tightly and push down the speed control key. The liquid ingredients you
are mixing cannot submerge the juncture of the appliance.
• Move the dip downwardly and upwardly.
• After use, please pull out the plug and disassembly the fitting.
• Not allowed to use continuously more than 1 minute.
• Always disconnect the appliance from the supply if it is left unattended and before assembling,
disassembling or cleaning.