Acme CA03 - Manual (Page 5)

5
GB
Drivers Installation
1. Before attaching webcam to the computer, install drivers first. Insert
the Web Cam installation CD into the CD-ROM of your computer.
2. Select the model you want to install (the model is written on your
product package).
3. Wait a few seconds and software will guide you through the software
setup process automatically. Then follow on-screen instructions.
4. After installing the drivers, take out the drivers CD, and connect the
Web Cam to the USB port of your computer. Your computer will search
the Web Cam automatically.
5. Operating system will ask you to restart your computer. Please follow
the instruction to restart your computer.
6. After restarting, go to “Start” menu and find “USB PC Camera” in the
program list. Then click “AMCap”.
7. When the “AMCap” begin to work, please click “Options” and select
“Preview”. Now, you can begin to use Web Cam.
Notices:
•
Don’t use fingers or any other sharp or coarse items to touch the
camera. Soft cotton cloth is highly recommended to clean the optics
parts.
•
Don’t use this product when ambience is too hot or cold or dusty.
•
Please avoid this product dropping heavily. Heavily dropping will
cause it not to work well.