Acme BH-01 - Manual (Page 5)

5
GB
Before you can start using the headset, you must charge the battery and pair the headset with a compatible
phone.
Note: Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit
cards or other magnetic storage media near the headset, because information stored on them may be erased.
Charger and batteries
Check the model number of any charger before using it with this device. The Bluetooth headset is intended
for use with the chargers that is included in the package.
Charge the battery
This device has an internal, rechargeable battery. It connects the charger cable to the headset.
1. Connect the charger to a wall outlet. The red indicator light is displayed during charging. If charging
does not start, disconnect the charger, pug it again, and retry. Charging the battery fully may take up
to 2 hours.
2. When the battery is fully charged, the red indicator light will turn off. Disconnect the charger from the
wall outlet and the headset.
The fully charged battery has power for up to 4 hours of talk-time or up to 200 hours of standby time.
However, the talk and standby times may vary when used with different mobile phones, products that use
a Bluetooth connection, usage settings, usage styles, and environments.
When the battery is running out of power, the red indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the Answer/end key for 3 seconds. The blue indicator light starts to flash.
To switch off, press and hold the power key for 4 seconds until the red indicator light is displayed briefly.