Acme SP102 - Manual (Page 5)

5
GB
Cleaning
Unplug the power cable before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth
for cleaning.
Operations
Charging:
• Connect USB cable into SP102 mini USB port.
• Connect the USB plug into any computer USB Port, it is now charging.
Red LED colour = SP102 is charging
Green LED colour = SP102 is fully charged
Using :
• Make sure that the “Volume” knob is set to the minimum level.
• Pull out the 3.5mm audio jack from the bottom, connect it to any music device (3.5mm jack
ports).
• Turn the speaker on by turning the middle ring wheel clockwise and turn it counter clockwise to
turn it off.
• Adjust the desired sound volume by rotating the middle ring.
• Now you can enjoy music without a USB power supply cable. The speaker can also be used with
a USB cable connected.
• Rotate the audio cable back by pulling units until the end, it will auto rotate back.